Cleaning And Care - Klarstein 10028303 Manual Del Usuario

Using the Control & Display Panels
ON/SPEED After the tank is filled with water, connect the tower evaporative cooler to a power outlet.
The unit will beep twice, indicating that the cooler is in standby mode at this time. Press
& OFF
the ON/SPEED button to turn on the tower evaporative cooler. To adjust the fan speed,
press the ON/SPEED button again until your desired speed has been reached. To turn
the tower evaporative cooler off and revert back to standby mode, press the OFF button.
COOLER/ After the desired fan speed has been selected, press the COOLER/HUMIDIFIER button
to activate the cooling/humidifying function. This powers the water pump, cools the
HUMIDI-
air and adds moisture to your air at the same time. The snowflake icon will also be
FYER
visible on the display panel once the cooling/humidifying function has been selected.
MODE Setting the airflow mode is optional. To set the airflow mode, press the MODE button.
Manual Mode: Indicated by the three circular icons on the display panel, this allows
you to set the fan speeds manually.
Sleep Mode: Indicated by the moon icon on the display panel, this setting will gra-
dually lower the fan speed at different intervals. If the fan speed is set to high, the
cooler will run for 30 minutes on high speed, 30 minutes on medium speed and then
continue to operate on low speed.
Natural Mode – Indicated by the palm tree icon on the display panel, this setting will
adjust the airflow speed between low, medium and high.
TIMER This tower evaporative cooler is equipped with a 7.5 hour programmable timer. To set
the timer, press the TIMER button. Each press of this button will add 0.5 hours to the
set time. The set time will be indicated in the middle of the display panel.
SWING To activate the oscillation feature, press the SWING button. The evaporative cooler's
air louvers will automatically move from side to side, which increases air circulation
and distributes air more evenly.
• Regular cleaning and maintenance is an essential step in maintaining the longevity of your tower
evaporative cooler and ensuring that it operates free of defects.
• Always unplug the evaporative cooler from the power supply before servicing or cleaning.
• Use a soft cloth and a mild soap and warm water solution to clean the unit's exterior. Do not use
harsh cleaners, gasoline, paint thinner, benzene, etc., as these substances can damage the evapo-
rative cooler. Thoroughly dry all of the cooler's parts with a soft cloth before reconnecting the unit
to the power supply.
• If the evaporative cooler will not be in use for an extended period of time, place the unit back in
its original carton and keep it stored in a clean, dry place.

Cleaning and Care

8