Specifications; Spécifications; Technische Daten; Especificaciones - Samson TM300 Manual De Instrucciones

Specifications

Mixer / Pre Amp Section:
1. Frequency Response (± 1 dB)
2. Total Harmonic Distortion (20 Hz to 20 kHz, trim minimum)
3. Maximum Voltage Gain
Mic to Post EQ Main Insert L,R
Mic to Aux Send 1,2
Mic to Mono Out
Line to Post EQ Main Insert L,R
Stereo to Post EQ Main Insert L,R
Aux Return to Post EQ Main Insert L,R
Tape In to Post EQ Main Insert L,R
4. Residual Noise (with DIN audio filter)
All Fader Min / Post EQ Main Insert L,R
All VR Min / Aux Send 1,2
Ch Fader Min, Master Fader Max
5. Equivalent Input Noise (-50 dB, Mic In pins 2,3 150 Ω,with DIN audio filter.) -127 dB
6. Crosstalk (@ 1 kHz, Trim Min.)
Channel to channel
Input to output
7. EQ Control
High (10 kHz)
Mid (1.8 kHz)
Low (100 Hz)
8. Graphic Equalizer
(63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.4 kHz, 15 kHz)
9. Phantom Power
10. Signal Polarity (Phase)
Power Amp Section:
1. Maximum Output Power (0.5% THD @ 1 kHz)
2. Total Harmonic Distortion (20 Hz to 20 kHz, 1/2 rated power)
3. Frequency Response (1 W/4 ohm, ±0.5 dB)
4. Signal To Noise Ratio
5. Channel Separation
6. Output Offset Voltage
General:
1. Dimensions (W x D x H)
2. Weight
3. Power Requirements
4. Power Consumption
115 V ac 60 Hz for UL and CSA Version
230/240 V ac 50/60 Hz for BSI and Central Europe Version
58
20 Hz - 20 kHz
same as Input
150 W / 4 ohm
20 Hz - 20 kHz
491 x 349 x 139 mm
19.35 x 13.75 x 5.5 in
29.7 lb • 13.5 kg
100 V ac 50/60 Hz for Japan Version
0.02%
+64 dB
+74 dB
+54 dB
+44 dB
+24 dB
+10 dB
+24 dB
-90 dB
-90 dB
-75 dB
-70 dB
-70 dB
±15 dB
±12 dB
±15 dB
±12 dB
+48 V
0.2%
> 100 dB
75 dB
± 100 mV
780 w