GE IM-5D Manual Del Propietario E Instrucciones De Instalación página 13

INSTALLING THE WATER LINE (Continued)
CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE
9
supply, you will need to provide one. See
NOTES:
• Before making the connection to the
refrigerator, be sure the refrigerator power
cord is not plugged into the wall outlet.
filter, we recommend installing one if your
water supply has sand or particles that
could clog the screen of the refrigerator's
filter. Do not cut plastic tube to install filter.
• Before connecting the water line to the house,
purge the house line for at least 2 minutes.
A
compression nut and ferrule (sleeve) onto the
end of the tubing coming from the house cold
water supply.
49-60740-4
Installation Instructions
™
Tubing Clamp
Tubing Clamp
Bride
Abrazadera del tubo
1/4" Tubing
1/4" Tubing
Tuyau de 1/4 po
Tubería de 1/4 "
nuts are already assembled to the tubing.
B
of the tubing into the refrigerator connection, at
the back of the refrigerator, as far as possible.
While holding the tubing, tighten the fitting.
insert the molded end of the tubing into the
refrigerator connection, at the back of the
refrigerator, and tighten the compression nut
until it is hand tight. Then tighten one additional
turn with a wrench. Over tightening may cause
leaks.
Fasten the tubing into the clamp provided to
C
hold it in position. You may need to pry open
the clamp.
1/4" Compression
Nut
SmartConnect
Tubing
Ferrule
(sleeve)
OR
tubing, the
™
tubing,
™
™
Connection
13