Connecting A Microphone; Connecting An External Audio Device; Charging Mobile Devices Via Usb - Lenco PA-325 Instrucciones Para El Usuario

Connecting a microphone

1. Make sure that the Bluetooth
OFF).
2. Decrease the volume on the Bluetooth
3. Insert the connecting plug of your microphone (not included in delivery) into the MIC 1
INPUT connection socket.
4. Switch the Bluetooth
5. You can increase or decrease the microphone volume by turning the MIC 1 VOLUME
dial clockwise or anti- clockwise.

Connecting an external audio device

1. Switch the Bluetooth
volume.
2. Connect the headphones output on the playback device to the AUX INPUT connection
socket on the Bluetooth
delivery).
3. Switch on both devices.
4. Start or stop playback on the playback device.
5. Increase or decrease the volume on the playback device and on the Bluetooth
system.
6. Switch off the two devices before disconnecting them.

Charging mobile devices via USB

The USB CHARGE connection socket allows you to charge the batteries of mobile
devices up to max. 5V, 1A that are designed to do so and have the necessary USB
interface (e.g. MP3 players, smartphones, etc.). Observe the technical specifications
of the devices you wish to connect.
1. Switch off the mobile device you wish to charge.
2. Connect the mobile device to be charged and the Bluetooth
suitable USB connecting cable and insert it into the USB CHARGE connection socket
on the sound system.
The mobile device connected will be charged.
® sound system is switched off (POWER switch is set to
® sound system.
®
sound system on (POWER switch is set to ON).
® sound system and the external audio device off and decrease
®
sound system using an audio cable (not included in the
® sound
® sound system by using a