Connect The Power Cord - Kohler K-7420 Guia De Instalacion

Power Cord

3. Connect the Power Cord

Loosen each of the five small screws located where the wires will
be connected.
Route the power cord into the docking station.
NOTE: There is a wiring schematic on the inside of the docking
station. Refer to the schematic when attaching the wires.
Slide the bare ends of the wires into the correct ports (as shown)
and tighten each screw to secure the wires in place.
Kohler Co.
Orange
Blue
Red
White
Black
Connector
Harness
Bottom Cord
Opening
9
Back Cord
Opening
1197249-2-A