Programming The Remote Control - Kohler K-1703 Guía De Propietario

Ocultar thumbs Ver también para K-1703:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Increases
Heater
Flow
Decreases
Power
Flow
On/Off
Remote Control
The remote control places the whirlpool functions at your fingertips to
further enhance your bathing experience. The functions of the remote
are identical to the user keypad. You can turn the whirlpool on and off,
turn the heater on and off, and increase or decrease the water flow
with the press of a button.
The waterproof remote control is designed to be used in the bath and
will float in the water.
Two AAA batteries are used in the remote control. To replace, simply
unscrew the endcap and insert the batteries, as shown above. Tighten
the endcap securely, making sure the endcap makes contact with the
seal.

Programming the Remote Control

NOTE: Programming of the remote control is required. If you
replace your remote control or replace the pump control, it is
necessary to program the remote control.
Turn the whirlpool power on.
Turn off all modes of operation. Wait approximately one minute
until the keypad darkens completely.
On the user keypad, press the up arrow, down arrow and the
heater button simultaneously. The bottom LED on the keypad's
indicator bar will begin flashing.
1021550-5-E
4
Kohler Co.
Tabla de contenido
loading

Tabla de contenido