Surface-Mounting The Beacon (191Xl Series); Figure 2 Surface-Mounted Beacon - Federal Signal 191XL Serie Manual De Instalación Y Mantenimiento

Surface-Mounting the Beacon (191XL Series)

To surface mount the beacon:
1.
Use the mounting base as a template to mark the location of
the two mounting holes.
2.
Drill a 9/32 inch (7.143 mm) hole at each mark.
3. Secure the beacon to the mounting surface with installer
supplied hardware.
191XL-S LIGHT
INSTALLER-SUPPLIED
MOUNTING HARDWARE
DRILL TWO 9/32"
(7.143 mm) HOLES
MOUNTING SURFACE

Figure 2 Surface-mounted beacon

ASSEMBLY
Model 191XL Series LED Beacon
Installation and Service Instructions
290A6880
11