HP AMP Serie Guía Rápida página 2

4
1
3
HP AMP
Pair the speaker to your Bluetooth device
EN
Make sure your device is within10 m/30 ft of the printer, then...
1. Press until the light flashes. When the light flashes, the printer is in Bluetooth pairing mode.
2. Make sure Bluetooth is enabled on your mobile device.
3. On your mobile device, search for available Bluetooth devices, then select HP AMP from the list.
When the Bluetooth light changes from flashing to on, your mobile device and speaker are paired, and you are ready to
stream music to the speaker through your music apps.
To use the speaker system...
Press to listen to an incoming call on the speaker. Press
If you want to reject the call, press and hold the
Press to increase or
Press to play or pause the audio stream. Press
Press to turn Bluetooth on and off.
Press and hold
The speaker audio is stopped during printing to ensure the best print quality. It automatically resumes
again shortly after printing is completed.
Want to pair more devices?
When you want to pair additional devices, make sure no other Bluetooth devices are connected to the speaker, then follow
steps 1 through 3 above. Up to eight paired Bluetooth devices can be stored in the printer memory. Two Bluetooth devices
stored in the printer memory can be connected to the speaker at the same time.
to decrease speaker volume.
for five seconds to reset Bluetooth.
2
again to end the call.
until the call is rejected.
to mute and unmute a phone call.