Lower Anchor Connectors And Top Tether (Latch) - Britax ONE4LIFE CLICKTIGHT Guia Del Usuario

Installation with Lower Anchor Connectors and Top
Tether (LATCH)
Do NOT install by this method for a child weighing more
than 35 lb (15.9 kg).
1. Extend the top tether strap
by lifting on the top tether
adjuster.
2. Unhook the top tether hook
from the back of the child
restraint and place it up and
over the seatback.
3. Open the CLICKTIGHT.
Squeeze the CLICKTIGHT
release buttons underneath
the front cover flap and lift
to open.
4. Open the storage pocket.
Remove the lower
connectors by pushing the
red buttons and pulling
away from the child
restraint.
5. Extend lower connector
strap to its longest length
by pressing grey button on
adjuster.
6. Recline child restraint to the
appropriate position. Refer
to page 15 to determine
appropriate recline position.
7. Place child restraint
FORWARD- facing on the
the vehicle seat so that the
car seat base is flat on the
vehicle seat and is parallel to
vehicle seat.
8. Ensure that no more than
3 in. (7.6 cm) of the base
hangs over the front edge of
the vehicle seat.
3 in
27