Product Description And Specifications - Bosch PSR 12 Manual Original

OBJ_BUCH-149-005.book Page 11 Friday, June 28, 2013 4:42 PM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Torque preselection ring
5 Indicator for right rotation
6 Indicator for left rotation
7 Screwdriver bit*
8 Battery unlocking button
9 Battery pack
10 "PowerLight"
11 Rotational direction switch
12 On/Off switch
13 Handle (insulated gripping surface)
14 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
No-load speed
Max. torque for hard/soft screwdriving application
according to ISO 5393
Max. screw dia.
Max. drilling dia.
– Steel
– Wood
Chuck clamping range
Weight according to EPTA-Procedure 01/2003
Bosch Power Tools
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 75 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
Drilling into metal: a <2.5 m/s
h
2
Screwdriving: a <2.5 m/s , K=1.5 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
PSR 12
3 603 J55 5.. 3 603 J55 4..
V= 12
-1
min 0–700
Nm 26/11
mm 8
mm 10
mm 20
mm 0.8–10
kg 1.4
English | 11
2 2
, K=1.5 m/s ,
2
.
PSR 14,4 PSR 18
3 603 J55 3..
14.4 18
0–700 0–700
28/12 30/13
8 8
10 10
25 28
0.8–10 0.8–10
1.5 1.7
1 609 92A 0AM | (28.6.13)