Astralpool 37059 Manual De Instalación página 10

Warning: for the first 30 minutes after your device has been activated with the magnet for
the first time, the siren sounds only for a short time, at a low volume. You are in TEST mode.
For more information on this mode, refer to item 4.5.
3.5. Installation tests
Make sure that the pool is still, and that your immersion detector is monitoring (indicator light off).
If such is not the case, move the magnet over the swimmer symbol:
Prepare a 6 kg weight by taping together the four 1.5 liter water bottles, as shown below:
1
Your immersion detector
is monitoring (indicator light off).
If in spite of this, the indicator light does not go
off, this means that the pool is not still enough.
You must imperatively wait until your pool is still
before carrying out the tests.
To make it easier for you to recover the 6 kg
weight from the pool, we recommend that
you tie a rope about 2 meters long around
the neck of one of the 4 bottles.
2
10 mn
Filtering working for 10 minutes,
your immersion detector is monitoring
(indicator light off) and must not go off.
9