IKEA SKINANDE Manual De Instrucciones página 87

ENGLISH
2. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode. Refer to ’'SET-
TING AND STARTING A PROGRAMME’'.
•• If the salt indicator is on, fill the salt
container.
•• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for
the type of load and soil.
Using the detergent
1
3
A
Put the detergent or the tablet in the com-
partment (A).
2
A
4
B
If the programme
has a prewash
phase, put a small
quantity of deter-
gent in compart-
ment (B).
Setting and starting a programme
Setting mode
The appliance must be in setting mode to
accept some operations.
The appliance is in setting mode when, af-
ter the activation:
•• All the programme indicators come on.
If the control panel shows other conditions,
press and hold function buttons (B) and (C)
at the same time until the appliance is in
setting mode.
Starting a programme without delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Make sure that the appliance is in set-
ting mode.
4. Press the button of the programme you
want to set. The programme duration
flashes in the display.
5. Close the appliance door. The pro-
gramme starts.
•• If you open the door, the display
shows the programme duration that
decreases with steps of 1 minute.
Starting a programme with delay start
1. Set the programme.
11
5