General Installation Instructions; Before You Begin - Dell RapidRails Guia De Instalacion

General Installation Instructions

This installation guide provides instructions for trained service technicians installing one or more systems
in an open-frame relay rack or in a rack cabinet. The RapidRails™ rack kit can be installed without tools in
manufacturer's rack cabinets that have square holes; the VersaRails™ rack kit can be installed in most
industry-standard rack cabinets that have square or round holes. The procedures for installing both
RapidRails and VersaRails rack kits are similar. One rack kit is required for each system installed in the rack.
CAUTION:
Do not install rack kit components designed for another system. Use only the rack kit for your system.
Using the rack kit for another system may result in damage to the system and personal injury.
NOTE:
If your system is a tower version, you must install a tower-to-rack kit. Instructions for installing this kit are
included in a separate document.
The RapidRails rack kit can be installed in most industry-standard rack cabinets.
NOTICE:
The VersaRails rack kit is intended to be installed by trained service technicians in a rack that meets the
specifications of American National Standards Institute (ANSI)/Electronic Industries Association (EIA) standard
ANSI/EIA-310-D-92, International Electrotechnical Commission (IEC) 297, and Deutsche Industrie Norm (DIN) 41494.
One rack kit is required for each system that is installed in a rack.

Before You Begin

Before you begin installing your system in the rack, carefully read "CAUTION: Safety Instructions" on
page 5, as well as the safety instructions found in your Product Information Guide for additional information.
CAUTION:
When installing multiple systems in a rack, complete all of the procedures for the current system
before attempting to install the next system.
CAUTION:
Rack cabinets can be extremely heavy and move easily on the casters. The cabinet has no brakes.
Use extreme caution while moving the rack cabinet. Retract the leveling feet when relocating the rack cabinet.
Avoid long or steep inclines or ramps where loss of cabinet control may occur. Extend the leveling feet for
support and to prevent the cabinet from rolling.
Important Safety Information
Observe the safety precautions in the following subsections when installing your system in the rack.
CAUTION:
You must strictly follow the procedures in this document to protect yourself as well as others who
may be involved. Your system may be very large and heavy, and proper preparation and planning are important to
prevent injury to yourself and to others. This becomes increasingly important when systems are installed high up
in the rack.
6
Rack Installation Guide