GCE MEDIFLOW ULTRA II Instrucciones De Uso página 3

Before initial use the product shall be kept in its original packaging. GCE
recommends use of the original packaging (including internal sealing bag
and caps) if the product is withdraw from operation (for transport and stor-
age).
Statutory laws, rules and regulations for medical gases, accident preven-
tion and environmental protection must be observed.
OPERATING CONDITIONS
-20/+60 °C
10/100%
600/1200 mbar
4. PERSONNEL INSTRUCTIONS
The Medical Devices Directive 93/42/EEC states that product provider
must ensure that all personnel handling the product are provided with the
operating instructions & performance data.
Do not use the product without properly familiarization of the product
and its safe operation as defi ned in this Instruction for use. Ensure user
is aware of particular information and knowledge required for the gas
in use.
5. PRODUCT DESCRIPTION
Gas from the medical gas
pipeline system
through the inlet connector,
then calibrated in the fl ow
control head and deliver to
the user through the fl ow out-
let user connection. Diff erent
fl ows can be selected by the
fl ow control knob on the fl ow
head.
A - INLET QUICK CONNEC-
TOR (QC)
The low pressure regulator is fi tted to the medical gas pipeline system
terminal unit or to medical regulator by a gas specifi c male probe.
B - FLOW CONTROL HEAD
Diff erent fl ows can be selected by the fl ow control knob on the fl ow head.
STORAGE AND TRANSPORT
A
entering
3/147
CONDITIONS
-30/+60 °C
10/100%
600/1200 mbar
EN
B
C