Function For Hot Water; Keep Warm Function - CASO DESIGN TeeGourmet Pro Manual Del Usuario

The device beeps and stops working. The illumination of the ON/OFF button (An/Aus) will
turn off and the display turns off after 2 minutes. The device switches to standby-mode.
► The tea filter is very hot after brewing process. Let the tea filter cool down before
touching or removing it.

14.3 Function for hot water

Remove the tea filter when you want to boil water but do not want to make tea.
► When you have cooked tea before, then thoroughly clean the kettle before boiling water.
Fill 0,5 – 1,7 L water in to the kettle. Replace the lid and turn it to position CLOSE. Place
the kettle onto the base. Plug the plug into the socket.
The device beeps. The display shows the last selected temperature and brewing time.
Set brewing time to 0:00. Set the desired temperature with the
Press ON/OFF button (An/Aus) to start the process.
The device beeps and stops working when the desired temperature is reached. The
illumination of the ON/OFF button (An/Aus) will turn off and the display turns off after 2
minutes. The device switches to standby-mode.
► You can stop the boiling process at any time by pressing the ON/OFF button (An/Aus).
► When brewing time 0:00 is displayed then water will be boiled but tea will not be
brewed.

► When you use
time are displayed.

14.4 Keep warm function

After boiling of water or tea the kettle can be kept warm for 60 minutes.
To do this, press the keep warm button (Warmhalten) after you have started the boiling
process. The keep warm button (Warmhalten) is illuminated during keep warm process.
The time counts until 60:00.
The keep warm temperature depends on chosen temperature.
Chosen temperature
40-45°C
50-65°C
70-80°C
85°C
90-100°C
Warning
Please note
Please note
buttons for temperatur, then the set temperature and brewing

Keep warm temperature
40°C
50°C
70°C
75°C
80°C
buttons.
38