Idiomas disponibles
Idiomas disponibles
Up to 50 photographs can be stored. When the store is full, the oldest
photograph will be overwritten.
Press "Replay"
to browse. If you wish to delete a photograph, select "Delete"
according image. When prompted "Delete?", confirm to deleting with
"Yes"
or "No"
Viewing and deleting photographs
Management of the stored photographs can also be handled via the
main menu of video receiver. In the case of several registered monitors,
the number of the monitor is displayed for the according photograph.
On order to view or delete photographs, please follow as below:
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select "Snap Show".
Press the left key
2. Use the Navigation keys "" and "" to browse.
3. If you wish to delete a photograph, select "Delete"
ding image. When prompted "Delete?", confirm to deleting with „Yes"
or „No"
Video receiver: Reset to factory default
In order to reset the video receiver to the factory defaults:
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select "Default set.".
Press the left key
2. Use "" and "" to enable or disable the function.
3. Press "Save"
After resetting, the receiver will return to standby mode.
PLEASE NOTE: All custom settings and stored photographs will be lost!
Video receiver: Setting the alert/ringtone tone volume
The volume of the alert tone can be adjusted in 5 levels. Number „0" is
silent and „4" offers maximum volume.
1. Press any key to switch the display on. Press the menu key
enter the main menu. With the navigation keys, select „Alert volume".
This entry can be found on the third page of the main menu.
to view the photographs. Use the Navigation keys
to cancel the process.
(Select) to enter the selection.
to cancel the process.
(Select) to enter the selection.
to save the setting.
in the
to
in the accor-
to
to
English 29
EN
