Idiomas disponibles
Idiomas disponibles
Reseting the registration
All registered monitors can be deleted. To delete the registered moni-
tors, press and hold the Accept key
and the right key
simulta-
neously for 5 seconds. The register interface will then display „Register
deleted".
Viewing monitor feeds
If multiple door monitors have been registered, the receiver can toggle
between the transmissions of the various door monitors. Press and hold
the Monitor key
for 1 second. The video receiver will display a list of
the connected monitors. With the Navigation keys "" and "", select
the desired monitor. The images from the selected monitor will be dis-
played. Please note: This function is only available if the door monitor is
connected via the DC+12 V wire feed.
Activating the door monitor motion detector
The door monitor camera can automatically activate and transmit
the image when an object moves in front of it. When the automatic
snapshot function is activated, 1 - 3 pictures (depending on the selec-
ted setting) will be taken. In order to activate the motion sensor, remove
the battery casing and switch the selector to "ON". To deactivate the
motion sensor, switch the selector to "OFF".
To automatically save a photo of the detected object, refer to "Snapshot
settings" (Page 29).
Video monitor operation
When the call button of the door monitor is pressed, the video receiver
rings and the video image of the visitor appears on the display.
- In order to talk to the visitor, press the Accept key
.
- To decline, press the End key
, this will cancel the ring and video
feed.
English 26
