Controls & Features - Ariens AX Serie Manual De Funcionamiento

Controls & Features
CONTROLS
1. On/Off Switch
The engine rocker switch enables and disables the ignition system.
Push the engine switch to the ON position to start the engine. Push
the engine rocker switch to the OFF position to stop the engine.
2. Choke Control Knob
The Choke Control Knob opens and closes the choke valve in the
carburetor. The "CHOKE" position enriches the fuel mixture which
allows easier starting a cold engine. The "RUN" position provides
the correct fuel mixture once engine warms up. Never try to shut the
engine down using the Choke Control Knob.
3. Primer Bulb
The Primer Bulb system is designed to enrichen the fuel mixture for
starting a cold engine. DO NOT over prime the fuel system. To properly
use the Primer Bulb system, depress Primer Bulb 3 times maximum
when starting a cold engine. Do not use Primer Bulb system when
attempting to start a warm engine.
4. Fuel Control Knob
The Fuel Control Knob opens and closes the passage between the
fuel tank and carburetor. The Fuel Control Knob must be in the "ON"
position for the engine to run. When the engine is not in use, be sure to
turn the Fuel Control Knob to the "OFF" position.
5. Oversized Recoil Handle
The engine is started by pulling the Recoil Handle. Always grip
firmly and have your body positioned properly when pulling.
When starting the engine:
· Slowly pull Recoil Handle until resistance is felt.
· Then pull firmly the full length of the rope to start engine.
· Never wrap thumb around Recoil Handle in the event of
engine kick-back.
6. Oversized Gas Cap
Allows for easy opening and closing for more
efficient refueling.
7. Oil Fill and Dip Stick
Location to add oil during required maintenance schedule and also to
check oil-level prior to daily operation.
8. Oil Drain
The oil drain can be located on either side.
1 2
3
5
7
8
6
4
ARIENS AX Snow Engine Manual 4