Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.5. GW 180 configuration
To configure the GW 180, the user must download the following software: ITCI Manager (version
above 3.02.19) and Web programmer (version above 1.6.0). They are available at Intelbras' website.
To access the programming of the gateway, you must connect it directly to the computer, as follows:
Antena (5-8)
Antena (1-4)
Ethernet
Reset
AC 90 - 240 50/60Hz
8
7
6
5
4
3
2
1
Connection to computer
Detailed information and GW 180 procedure of use can be found on the product manual, available
at www.intelbras.com.br.
Note:
it is possible to check GSM signal level via configuration web page / web configurator / web interface.
48
Tabla de contenido
