Grounding; Gw 180 Ethernet Port Configuration - Intelbras GW 180 Guia Del Usuario

4.3. Grounding

Grounding is done with tripolar cable that comes with the product.

4.4. GW 180 Ethernet port configuration

The default network configurations available are:
» IP Address: 10.10.10.2.
» Network mask: 255.255.0.0.
» Network gate: 10.10.10.1.
» Port: 61000.
To listen to the IP address, mask, network gateway, and port, the following commands must be inserted:
» Listen to IP address: * + 60 + 997 + *.
» Listen to network mask: * + 60 + 996 + *.
» Listen to network gateway: * + 60 + 995 + *.
» Listen to port: * + 60 + 994 + *.
Note:
to make it possible to listen, make sure that the PBX extension took an analog trunk (FXO) that is connec-
ted to a FXS from the GW 180, and then, insert the commands. It is only possible to run the commands if there
is a chip in the respective port.
47