Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Installation
The GW 180 Gateway enables to connect a module board. To connect the board, do the following:
1. Unplug the product from the power supply;
2. Remove the screws from the front part;
3. With the product open, unplug the AC power cable from the CN2F;
4. Remove the base board from the cabinet;
5. Remove the label that prevents 5-8 SIM Cards from being inserted;
6. Place the module board into the slot according to the following picture:
7. Screw the base board to the cabinet;
8. Connect the AC power cable to the CN2F connector;
9. Close the product and connect the AC power cord into an electrical outlet.
43
Tabla de contenido
