Cleaning And Maintenance - Bestron DBB2200E Manual Del Usuario

3. Stand the vacuum cleaner upright. An attachment slot for the accessory bracket
is fitted to the back of the vacuum cleaner next to the front castor see Figure 10.
Slide the bottom of the accessory bracket into the slot. This avoids the need to
dismantle the vacuum cleaner after use; you can store the assembled appliance
and retrieve it again quickly when you need it.
CLEANING
AND MAINTENANCE
1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the appliance.
2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
CLEANING
AND MAINTENANCE
Change the dust bag immediately once the 'dust bag full' indicator turns red, see
Figure 11.
It is possible that the indicator turns red whilst the dust bag is not yet full. If so,
then the nozzle, hose or tubes may be blocked. These will then need to be
unblocked.
1. Open the cover by pulling the cover release (dust bag) upwards. Remove the
dust bag from the holder, and dispose of it in a dustbin.
2. Fit a new dust bag in the holder with the arrow pointing downwards, and press
into position.
3. Press the cover until it clicks into place.
Make sure that the dust bag does not become pinched by the cover. This could damage the appliance
and/or the dust bag.
Note Dust bags for this vacuum cleaner are available from every major hardware store, with a statement
of the type number Bestron D00016/D0016S.
CLEANING
AND MAINTENANCE
Clean or replace the motor safety filter at least twice a year, and more frequently if the filter is visibly
blocked.
1. Remove the plug from the wall socket.
2. Remove the hose from the vacuum cleaner.
3. Open the cover by pulling the cover release (dust bag) upwards.
4. Remove the dust bag, see Figure 11.
5. Remove the holder for the motor safety filter from the vacuum cleaner, see
Figure 12.
6. Pull the motor safety filter from the holder.
7. Dispose of the filter, or wash it in lukewarm water. Allow it to dry thoroughly.
8. Return the cleaned or new filter to its holder, and return the holder to the
vacuum cleaner.
9. Fit the dust receptacle back into the holder. Press the cover until it clicks into
place.
- Cleaning
- Changing the dust bag
- Cleaning or replacing the motor safety filter
24
User's instructions
Figure 10 Storing the vacuum cleaner
Figure 11 Changing the dust bag
Figure 12 Removing the motor safety filter