Amica PPCG4.0ZpZt Manual De Instrucciones página 37

INSTALLATION
►
Install PPCG4.0ZpZt hob in a worktop (Fig.)
● prepare opening in the worktop with dimensions shown on the assembly drawing,
● for perfect fit, the hob should be sunk in flush with the worktop surface,
● connect the hob to a gas and electrical system in accordance with the instructions supplied,
● the gap between the hob and the worktop should be filled in with silicone glue,
● do not operate the appliance until the glue has hardened.
►
Remove
● disconnect the appliance from power,
● using a suitable tool cut the silicone sealing rim around the hob,
● push the hob gently upward from below to remove from opening.
Fig.
hob
PPCG4.0ZpZt
576
518
48
585 580
+1
560
560
522 505 +1
486 +2
490
min.600
50
=
37
R5 12
min.30
=
max.R5
8,5 6,5
+0,5