Safety Notices: take some time to read through the safety notices before installing the print server. Please observe all safety markings and instructions

when using this product.

Observe "Important:" in the text to avoid operational impairment. Do not proceed until you have fully understood the implications.

Electromagnetic Compatibility (EMC)

USA

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- reorient or relocate the receiving antenna

- increase the separation between the equipment and receiver

- connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- consult the dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to ensure compliance with

the class B limits.

Europe

This digital equipment fulfils the requirements for radiated emission according to limit B of EN55022, and the requirements for immunity according to

EN55024 residential, commercial, and light industry. Compliance is not valid for unshielded network cables.

Japan

This is a class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is

used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the

instruction manual. Compliance is not valid for unshielded network cables.

Australia

This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard 1998 AS/NZS 3548. Compliance is

not valid for unshielded network cables.

Liability: Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform your local Axis office,

which can be found on the cover of this document. Axis Communications AB cannot be held responsible for any technical or typographical errors and

reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard

to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular

purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing,

performance or use of this material.

Axis' Trademarks: AXIS IP JumpStarter, AXIS ThinWizard, axinstall, AXIS Print Monitor.

Other Trademark Acknowledgments: Adobe Acrobat Reader, Aix, Apple, ARP, BOOTP, Debian, Ethernet, EtherTalk, IBM, LAN Manager, LAN Server,

Macintosh, Microsoft, Novell NetWare, OS/2, OS/400, AS/400, Red Hat, Solaris, SuSe, UNIX/Linux, Windows, are registered trademarks of the respective

holders.

Support Services: should you require technical assistance, please contact your Axis dealer. If your questions cannot be answered immediately, your Axis

dealer will forward your queries through the appropriate channels to ensure you a rapid response. On the Internet you can find on-line manuals, technical

support, software updates, application software, corporate information, etc.

Patent information: Axis AB has intellectual property rights relating to technology embodied in the product that is described in this document. In

particular, and without limitation, these intellectual property rights may include one or more of the patents listed at http://www.axis.com/patent.htm and

one or more additional patents or pending patent applications in the US and other countries.

Software Acknowledgments: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

Tabla de Contenido