Axis 5400+ Guía De Usuario página 21

AXIS 5400+/AXIS 5600+ User's Guide
3. Enter the following command to download the
transfer mode):
get axinstall
4. Exit from the ftp program and enter the following command to install the AXIS 5400+/AXIS
5600+ using the
started.
sh axinstall (or sh ./axinstall depending on your system)
Note:
•
LPRng is not supported by axinstall
•
You need root privileges on your UNIX/Linux and Mac system in order to run axinstall
•
PROS is a protocol developed by Axis Communications. It comes in two versions;
named pipe (PROS A) and filter (PROS B).
If you need additional instructions, please refer to the AXIS 5400+/AXIS 5600+ User's Manual
which is available on www.axis.com
Proceed to Print Server Management and Configuration on page 23 for information on supported
management and configuration tools.
axinstall
script. Follow the instructions that appear when the script has
axinstall
script (make sure you use the ASCII
21