EVERSPRING SA801 Guía De Usuario página 2

SA801 WIRELESS KEYPAD
Installation Instructions
General Introduction
The Wireless Keypad is used to Arm/Disarm the system by using a four digit
access code authentication. Users may assign different PIN codes to identify
and allow control by members of the family. The Keypad also incorporates a
Panic function for emergency use and an anti-tamper protection feature that will
immediately initiate a Full Alarm condition when anyone attempts to open its
casing. Its great compatibility with our U-Net family security products makes it
suitable for smart home cloud based platforms such as HomeSys.
Product Layout
Setting/low battery LED
Key Meaning of Key
0 - 9 Access code input
Arm
Part-arm 1
Part-arm 2
Disarm
Binding with HomeSys
1. Loosen and remove the locking screw
from the bottom of the Keypad.
2. Remove the wall mounting plate.
3. Prepare three AA 1.5V alkaline batteries. Do not insert them into the unit yet.
4. Log into the Homesys account from a web browser.
5. Select "System", then "Add a Device".
6. Select "Keypad".
1
Wall mounting plate