Installing The Picoscope Software And Manual; Free Newsletter; Software Updates / Replacing Lost Software; Writing Your Own Software - PICO Scope USB Guía Rápida De Inicio

PicoScope USB Oscilloscope
1.5

Installing the PicoScope software and manual

1. Do not connect the oscilloscope to the PC yet!
2. Insert the Pico CD into your CD-ROM
drive. It should start automatically. (If it
does not, follow the steps on the right.)
3. Click the "Install Software" button.
4. Follow the instructions on the screen to
install PicoScope 6.
5. If an AC adaptor is supplied with the
oscilloscope, fi t the appropriate plug or
cable to the adaptor and plug the adaptor into the AC supply. Plug DC
the lead from the adaptor into the back of the oscilloscope. Switch on
the AC power.
6. *Connect the PC Oscilloscope to the PC (see connection drawing below).
Ignore any warnings that appear such as "This device can perform
faster" or "USB2 device connected to USB1 hub".
7. Windows XP and Vista only: The "New Hardware Found Wizard" will run.
Follow the instructions, and if the wizard asks to connect to Windows
Update, select "No". If a warning about Windows Logo testing appears,
click "Continue Anyway".
8. Windows XP and Vista only: With some products, the "New Hardware
Found Wizard" will run twice. If this happens, repeat the previous step.
9. Click the Windows Start button, go to "Programs" and then "Pico
Technology", then select "PicoScope" to begin using the PC Oscilloscope.
10. If an oscilloscope probe is connected to the oscilloscope, you should see
a small 50 Hz or 60 Hz signal in the oscilloscope window when you touch
the probe tip with your fi nger.
Key:
1. PicoScope PC Oscilloscope
2. PicoScope's USB port
3. Pico Technology blue* USB
cable
4. PC
5. PC's USB port
* Pico Technology recommends
using our specially designed blue USB cable for improved earthing and reliability.
2
To start the CD manually:
1. Click the Windows Start
button and select "Run..."
2. Type d:\pico (where 'd:' is
your CD-ROM drive)
3. Press the Enter key
1
3
4
2
Copyright © 2006-2013 Pico Technology Ltd. All rights reserved.
1.6

Free newsletter

Pico Technology sends out a free monthly newsletter by e-mail. This gives news of
product launches, software upgrades and application notes; and hints and advice.
We treat your e-mail details as confi dential and will not pass them on to any third
parties.
To subscribe visit: http://www.picotech.com/newsletter/
1.7

Software updates / replacing lost software

The latest versions of all Pico software can be downloaded free of charge from our
web site at: www.picotech.com.
If you require a new CD, please contact Pico Technology or your distributor. There
may be a small charge for this service.
1.8

Writing your own software

The CD ROM contains all the manuals and drivers you will need to develop your
own custom programs easily. Follow section 1.5 to install.
1.9

Input connections

The product manual installed with the software contains complete descriptions of
input connections. Follow section 1.5 to install the software and the manual.
1.10

Specifications

The product manual that was installed with your Pico software contains the latest
specifi cations for your PicoScope PC Oscilloscope. We recommend that you print a
copy of the specifi cation table and attach it inside the back cover of this guide for
future reference.
1.11

Technical support

The Pico Technology technical support web site and users' forum at:
www.picotech.com/support
information. Both the product manual and the web site contain phone, fax and
e-mail contact information for our technical support team.
5
contain regularly updated technical support
Quick Start Guide
DO115-14