Audio-Technica AT-LP60-BT Instalación Y Funcionamiento página 2

Wireless Turntable
Introduction
Thank you for purchasing the AT-LP60-BT wireless turntable. Audio-
Technica has been a leading manufacturer of innovative stereo
phonograph products for more than 50 years. We are pleased to provide
this turntable, with its excellent performance and many convenient
features, for your enjoyment.
The AT-LP60-BT wireless turntable features:
• Fully automatic operation
• Two speeds: 33 RPM and 45 RPM
/
1
3
• Professional aluminum turntable platter
• Integral Audio-Technica Dual Moving Magnet
replaceable diamond stylus
• Built-in Bluetooth transmitter function. Permits use of turntable with
wireless speakers, headphones and other devices with Bluetooth ®
wireless technology.
• Built-in switchable stereo phono/line level pre-amplifier. Permits use of turntable
with stereo systems having either magnetic-phono inputs or "AUX" (line-level)
inputs; also allows convenient use of turntable with most powered speakers
• Damped lift/cueing mechanism with front-panel control
• Removable dust cover
To assure maximum satisfaction from this product, please read the
information and follow the instructions presented in this manual. Please
keep the manual in an accessible location for future reference.
We suggest that you save all packaging materials for possible future
storage, moving or shipping.
CAUTION: To avoid stylus damage, make certain the included
stylus guard is in place whenever the turntable is being installed,
moved or cleaned.
Stylus assembly
Stylus guard
2
phono cartridge with
™
Stylus ("Needle")
Reference:
• Disconnect this product from the computer if you encounter any
malfunction like noise, smoke, smell, heat or damage with the
product. In such case, contact your local Audio-Technica dealer.
• Do not use the turntable within 22 cm of where a cardiac pacemaker
is installed. Pacemakers may be affected by radio waves of the
turntable.
• Do not use the turntable near medical equipment.
Radio waves may affect cardiac pacemakers and medical electronic
equipment. Do not use the product inside medical facilities.
• Do not use the turntable near automatic control devices such as
automatic doors and fire alarms.
Radio waves may affect electronic equipment and cause accidents
due to malfunction.
Simultaneous use with other devices
Failure, such as the interruption of sound, may be caused by radio wave
interference from devices that use the same frequency band (2.4GHz)
as the turntable, including devices with Bluetooth wireless technology,
devices using wireless LAN, digital cordless phones and microwaves.
Similarly, because radio waves of the turntable may affect these
devices, take the following precautions:
- Install the devices using the same frequency band (2.4GHz) away from
the turntable.
Instructions for Use
Any device which is connected to the turntable needs to meet the
Bluetooth standards established by Bluetooth SIG and be certified.
Even if the device meets the Bluetooth standards, it might not connect
to the turntable or the operation method and behavior may differ
depending on the device's characteristics and specification.