Control Panel; General Warnings - Ferroli QUADRIFOGLIO B Instrucciones De Uso, Instalación Y Mantenimiento

EN

1. GENERAL WARNINGS

• Carefully read and follow the instructions contained in this instruction booklet.
• After boiler installation, inform the user regarding its operation and give him this
manual, which is an integral and essential part of the product and must be kept with
care for future reference.
• Installation and maintenance must be carried out by professionally qualified person-
nel, in compliance with the current regulations and according to the manufacturer's
instructions. Do not carry out any operation on the sealed control parts.
• Incorrect installation or inadequate maintenance can result in damage or injury. The
Manufacturer declines any liability for damage due to errors in installation and use,
or failure to follow the instructions.
• Before carrying out any cleaning or maintenance operation, disconnect the unit from
the electrical power supply using the switch and/or the special cut-off devices.
• In case of a fault and/or poor operation, deactivate the unit and do not try to repair
it or directly intervene. Contact professionally qualified personnel. Any repair/re-
placement of the products must only be carried out by qualified personnel using orig-
inal replacement parts. Failure to comply with the above could affect the safety of
the unit.
• This unit must only be used for its intended purpose. Any other use is deemed im-
proper and therefore hazardous.
• The packing materials are potentially hazardous and must not be left within the
reach of children.
• The unit must not be used by people (including children) with limited physical, sen-
sory or mental abilities or without experience and knowledge of it, unless instructed
or supervised in its use by someone responsible for their safety.
• The unit and its accessories must be appropriately disposed of, in compliance with
the current regulations.
• The images given in this manual are a simplified representation of the product. In
this representation there may be slight and insignificant differences with respect to
the product supplied.
2. OPERATING INSTRUCTIONS
2.1 Introduction
Dear Customer,
Thank you for choosing QUADRIFOGLIO B, a floor-standing boiler FERROLI featuring
advanced design, cutting-edge technology, high reliability and quality construction.
Please read this manual carefully since it provides important information on safe instal-
lation, use and maintenance.
QUADRIFOGLIO B is a high efficiency, low emissions premix condensing heat gener-
ator for heating, running on natural gas or LPG and equipped with a microprocessor con-
trol system.
The boiler body consists of a patented stainless-steel helical tube heat exchanger and
a premix burner in stainless steel, equipped with electronic ignition with ionisation flame
control, modulating speed fan and modulating gas valve. QUADRIFOGLIO B is a heat
generator arranged to operate alone or in cascade.
FERROLI supplies (on request) all the plumbing fittings and fume manifolds for the con-
nection of 2 or 3 units in cascade in configurations of 70 + 70 kW to 320 + 320 +320 kW.
EN
8

2.2 Control panel

4
23°C
88°C
Thursday 9 Jan. 2014 00:15:60
Legend
1 = Contextual button 1
2 = Contextual button 2
3 = Contextual button 3
4 = Dot matrix display (example main screen)
5 = Menu navigation button
6 = Confirm/menu access button
7 = Menu navigation button
8 = Automatic/Manual Heating/DHW button
9 = Summer/Winter mode selection button
10 = Economy/Comfort mode selection button
11 = Menu exit button
12 = Main menu button
13 = Home button (back to main screen)
14 = Main switch
Contextual button
The contextual buttons (details 1, 2, 3 - fig. 1) are grey, with no screen print, and take on
a different meaning depending on the menu selected. It is essential to observe the indi-
cation provided by the display (icons and text). In fig. 1 for example, using the contextual
button 2 (detail 2 - fig. 1) it is possible access unit information such as: temperature of
sensors, work power, etc.
Direct buttons
The direct buttons (details 8, 9, 10 - fig. 1) always have the same function.
Menu/navigation buttons
The menu/navigation buttons (details 5, 6, 7, 11, 12, 13 - fig. 1) are used to navigate
among the various menus implemented in the control panel.
Menu structure
From the main screen (Home), press the Main menu button (detail 12 - fig. 1).
USER
TECHNICIAN
cod. 3541F572 - Rev. 01 - 09/2015
QUADRIFOGLIO B
1 2
60°C 40°C
M
S
14
fig. 1 - Control panel
MENU
1
5 6 8 9 11 12
3 7 10 13
12