DeWalt DWH051-XJ Manual De Instrucciones página 21

CHIPPING DUST EXTRACTION SYSTEM
DWH051
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.
Technical Data
DWHO51
Dust shroud short
Size (L x B x H) mm 210 x 173
x 105
Chisel type point/flat
Tool length cm 28–34
Weight kg 0.6
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire
Safety Instructions
WARNING! Always observe safety
regulations applicable in your country to
reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before operating the
attachment. Also refer to the manual of any power
tool that will be used with this attachment.
1) GENERAL
a)
b)
medium long
c)
282 x 173 355 x 173
x 105 x 105
point/flat point/flat
35–41 42–45
0.7 0.8
2) ELECTRICAL SAFETY
a)
b)
c)
3) PERSONAL SAFETY
a)
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Keep work area clean. Cluttered areas and
benches can cause accidents.
Keep children away. Do not let children
come into contact with the tool or
extension cord. Supervision is required for
inexperienced users.
Use appropriate tool. The intended use is
described in this instruction manual. Do not
force small tools or attachments to do the job
of a heavy-duty tool. The tool will do the job
better and safer at the rate for which it was
intended.
WARNING: The use of any accessory
or attachment or performance of any
operation with this tool, other than those
recommended in this instruction manual
may present a risk of personal injury.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting
a "live" wire may make exposed metal parts
of the power tool "live" and could give the
operator an electric shock.
Check beforehand (e.g. using a metal
detector) to ensure there are no
concealed electric cables or gas and
water pipes present in the area which
you are working. External metal parts
of the appliance may become live, for
example, when an electric cable is damaged
accidentally. This presents a serious risk of
electric shock.
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
EN G LI SH
19