Beper 90.369B Manual De Instrucciones página 11

Toaster oven Use instructions
25.Do not use outdoors, Indoor use only.
26.Do not use appliance for other than intended use.
27.A short power-supply cord should be used to reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
Longer extension cords are available and may be used if care is exercised in their use.
If a longer extension cord is used:
a)The marked electrical rating of the cord set or extension cord should be at least as great
as the electrical rating of the appliance; and
b)The cord should be arranged so that it will not drape over the countertop or tabletop where it can
be pulled on by children or tripped over unintentionally.
FOR HOUSEHOLD USE ONLY
WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other).This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not modify the plug in any way.
DESCRIPTION
1: Handle
2: Plate Upper Door Frame
3: Housing
4: Panel
5: Glass Door
6: Lower Door Frame
7: Foot
8: Indicator Lamp Cover
9: Timer Control Knob
10: Function Control Knob
11: Bake Tray
12: Wire Rack
▲Before using your electric oven for the first time, be sure to:
1.Read all of the instruction included in this manual.
2.Make sure that the oven is unplugged and the Time control is in the "OFF" position.
3.Wash all the accessories in hot, soapy water or in the dishwasher.
4.Thoroughly dry all accessories and re-assemble in oven, plug oven into outlet and you
are ready to use your new electric oven.
5.After re–assembling your oven, we recommend that you run it at the highest temperatu-
re on the function for approximately 5 minutes to eliminate any packing residue that
may remain after shipping. This will also remove all traces of odor initially present.
Please Note: Initial start-up operation may result in minimal smell and smoke (about 5
minutes). This is normal and harmless. It is due to burning of the protective substance
applied to the heating elements in the factory.
11