Configuring A Frequency Memory - Sennheiser evolution wireless Serie Operación Manual

Configuring a frequency memory

Transmitters and receivers of the Sennheiser evolution wireless series ew 100
have 4 switchable frequencies(channels presets) respectively to store up to 4
transmission/receiving frequencies.
DISPLAY
You can directly switch between the channels presets (u "Selecting the
frequency, channel number").
TUNE
Setting the transmission/receiving frequency
tune
Transmission and receiving frequencies are tunable in 25-kHz steps within a
switching bandwidth of 32 MHz max.
Special notes on multi-channel operation:
Several devices of the Sennheiser evolution wireless series ew 100 can be used
simultaneously on different frequencies. The factory-preset frequencies are
intermodulation-free. Before you program new frequency combinations, please
refer to the information on the correct frequency choice given in the planning
brochure "Practical Applications in RF Technology" which your local
Sennheiser agent has in stock or will be pleased to order for you from
Sennheiser.
TUNE
Frequency Frequency
CH NO
Channel No. 1 Channel No. 2
1
Select the channel preset for which you wish to set a frequency.
Select the "TUNE" menu by pressing the
appears on the display; after a short pause the currently set frequency
is displayed.
With the buttons you can now select a different frequency. The
/
frequencies are tunable in 25-kHz steps. The new frequency starts
flashing on the display and becomes effective immediately.
Press the SET button to return to the top menu level. The display
then switches back to the standard display.
TUNE
TUNE
Frequency
CH NO
CH NO
Channel No. 3
3
2
SET button until "TUNE"
TUNE
Frequency
CH NO
Channel No. 4
4
73