Dab/Dab+ Radio - Trevi DAB 7F96 R Manual De Uso

ENGLISH
9
6
7
1
12
11
10
10. 5V, 1A Power and charging
socket
BATTERY RECHARGE
1. Charge the device with a 5V
included) with microUSB socket.
2. The display shows the percentage of battery charge.
3. With the battery running out, a warning message is shown on the display and after a certain time the radio switches off
automatically.
Note: with the battery running out, the radio may behave abnor-
mally; in this case proceed with charging the battery.
SWITCHING ON/OFF - STANDBY
1. Extend the telescopic antenna;
2. Press and hold for 2 sec. the
display is turned on, press the key (3) again to turn on the
device;
3. When first switched on, the radio will start up in DAB mode
and start the automatic search for available radio stations;
POWER
4. Press the button
mode and continue to view the time on the display. Press and
hold for 2 sec. the button
Off the appliance.
FM/DAB/AUX-IN SELEC TION AND VOLUME
ADJUSTMENT
SOURCE
1. Press the button (6) to switch between the DAB +
reception band, the FM band and the
VOLUME
2. Turn the knob (1) to decrease or increase the volu-
me.
MENU SETTINGS
INFO/MENU
1. Press and hold the
the settings menu will appear on the display;
9 /TU- : /TU+
2. Press (7) or
item;
SELECT
3. Press button/knob (1) to enter the settings of the
selected item.
6
8
1
2
3
4
5
VOLUME/SELECT/ENTER
1.
SNOOZE
button
INFO/MENU
2. button
3. Power button
PRESET
4. button
: /TU+
5. tuner button
SOURCE
6. button
/TU- t
9
7. uner button
8. TFT LCD Display
9. Speaker
AUX IN
11. input jack
12. Phone out jack
1A battery charger (not
POWER
button (3) once the
(3) to put the device in Stand-by
POWER
(3) to completely Turn
AUX IN
input;
button (2) for a few seconds,
(5) button and select the desired
The following items are available in the settings menu (some are
displayed depending on whether DAB or FM mode is selected):
Full scan (DAB): selecting this item automatically scans and stores
received radio stations.
Scan Setting (FM): allows you to search on FM stations with a
strong signal or on all stations found.
Manual tune (DAB): select the desired frequency/ channel and
SELECT
confirm with (1). A bar will show the strength of the
received signal.
DRC (DAB): allows you to enable/disable the DRC function to
improve the sound when listening in noisy environments. You can
set the DRC level to high (high), low (low) or off (off ).
Prune (DAB): allows you to delete from the list of stored stations
all the radios found but not available (poor signal).
TA (DAB): enable or disable the Traffic Announcements function.
System setting: this item allows access to further settings.
Sleep: allows you to set an auto-off timer after which the ap-
pliance will go into standby mode automatically. It is possible
to select between 90, 60, 45, 30, 15 minutes. With the function
activated there is an icon in the shape of a moon with the time
remaining before turning off on the display.
Alarm: allows you to activate and set two alarms. After selec-
ting ALARM, select ALARM 1 or 2 and confirming you enter a
submenu in which to set:
On Time: set the activation time of the alarm.
Duration: duration in minutes of the alarm clock.
Source: set the type of ringtone between Buzzer
DAB, FM. Selecting DAB or FM is then prompted to
select one of the radio stations saved in memory.
Cycle: Daily (every day), Once (once only),
Weekends (on Saturdays and Sundays), weekdays
(from Monday to Friday).
Volume: alarm alarm playback volume, a bar is
displayed.
Alarm: On/Off to activate/deactivate the alarm.
Time allows you to set the current time/date.
Set Time/Date: set the current time and date.
Auto Update: select from which source you automa
tically set the time and date if available.
Set 12/24 Hour: set the 12/24H time format.
Set Date Format: set the date format.
Backlight: allows you to set the time and brightness level of
the display:
Timeout: set the time after which the display lowers
the brightness without commands.
On Level: indicates the brightness level of the
display when the device receives commands.
Dim Level: indicates the brightness level of the
display when the appliance is inactive.
Language: allows you to select the system language.
Factory reset: allows you to restore all the settings to the
factory settings. Select Yes for restore.
Software version:software version installed.

DAB/DAB+ RADIO

1. Select the DAB (Digital radio) mode; the first time the radio is
switched on, it will start up in DAB mode. It will automatically
scan for the available radio stations;
9 /TU- :
2. Press the (7) or
scroll through the list of received radio stations. Press the
SELECT
button/knob (1) to select the desired station;
DAB 7F96 R
/TU+
(5) button to display and