Tabla de contenido
Chicco BebèCare easy-tech features two alarm levels:
1. First level alarm: should the smartphone move away from
the vehicle with the installed equipment active, the phone will
emit an acoustic and visual alarm that can be muted within 40
seconds. Moving the smartphone towards the equipment does
not stop the alarm. The "STOP" button in the BebèCare APP
must be pressed in order to deactivate the alarm.
2. Second level alarm: this is activated the moment in which
the first level alarm was not silenced within the time window
provided for the first level alarm, and sends alarm messages to
all the predefined emergency numbers with the information
needed for geolocating the area where the baby is located.
At the end of the trip, unbuckle the seat belts, remembering
to always open the equipment (Fig. 3) to deactivate the system
and prevent the alarms from being activated.
The Chicco BebèCare APP comes with a package of alarm
messages" that will decrease with every second level alarm
message by a number equal to that of the emergency con-
tacts entered. Alarm messages can be bought through the
Chicco BebèCare APP. In case of insufficient residual alarm
messages, proceed with the purchase of one of the packages
available in the "Purchases" section of the APP. If the number
of alarm messages is insufficient, the system is disabled and is
not working. If there is no signal, Chicco BebèCare easy-tech
will correctly activate the first level alarm, but it is not able to
send the alarm messages to the emergency numbers (second
level alarm).
• The Chicco BebèCare APP supports not only the Chicco
BebèCare easy-tech anti-abandonment equipment, but also
the Chicco BebèCare range of child car seats with integrated
sensors, through the same family account.
• Chicco BebèCare easy-tech does not interfere with the nor-
mal operation of the Bluetooth® system that may be present
in the car.
1.3 USING THE CHICCO BEBÈCARE APP ON MULTIPLE
DEVICES/SMARTPHONES
After registering the family account and associating the car seat
with Chicco BebèCare easy-tech equipment using the smar-
tphone by scanning the QR code, it is possible to use Chicco
BebèCare easy-tech also with other smartphones that have
the Chicco BebèCare APP installed. It is possible to use the
same family account with an unlimited number of smartpho-
nes that have previously installed the Chicco BebèCare APP.
The settings predefined using the first smartphone (emergency
numbers, association of the equipment and the child's data)
will be automatically available also on the other smartphones
with the Chicco BebèCare APP and that are using the same
family account.
IMPORTANT: in the event that the family password is changed,
the new password must be shared with all users who share the
same family account.
IMPORTANT: if there are two smartphones in the same car
that were previously associated with the equipment and both
have the Chicco BebèCare APP active, the equipment will con-
nect with ONLY one of the two based on the reactivity of
the Bluetooth® system of the individual smartphones and this
condition cannot be changed until the equipment is deactivated
by opening the equipment or until the Bluetooth® signal is lost.
If the person with the smartphone that is connected with the
Chicco BebèCare easy-tech equipment at that moment moves
away from the car:
• the first level alarm will activate on the smartphone, which
can be silenced by interacting with the APP and pressing the
"STOP" button. This prevents the alarm messages from being
sent to the emergency numbers;
• after a few seconds, the second smartphone that is still in
the car will automatically connect with the Chicco BebèCare
easy-tech equipment.
WARNING: if two or more smartphones are used that have the
Chicco BebèCare APP installed, it is necessary to identify which
one is effectively connected to the equipment and therefore
must never be abandoned.
1.4 MANAGING MULTIPLE DEVICES BELONGING TO THE
CHICCO BEBÈCARE FAMILY WITH A SINGLE FAMILY AC-
COUNT
A maximum of 3 Chicco BebèCare devices (child car seats with
built-in sensors and/or accessory) can be associated with the
same family account, by repeating the operations described
previously. The Chicco BebèCare APP will monitor the status
of each device at the same time.
1.5 PERIODIC NOTIFICATION OF CHILD IN THE CAR FOR
A PROLONGED PERIOD OF TIME
If the child remains in the car seat with Chicco BebèCare easy-te-
ch activated for more than 30 minutes, a push notification will
appear on the smartphone, accompanied by a brief acoustic signal.
The user can disable only the acoustic signal on the "settings/no-
tifications" screen.
1.6 BATTERY
Chicco BebèCare easy-tech works with 1 CR2032 bat-
tery. You can monitor the level of the battery found in
Chicco BebèCare easy-tech equipment through the APP.
If the level is low, the user can replace the battery with
another with the same characteristics on their own, ma-
king sure they are the right way round.
To replace the battery, the user can proceed indepen-
dently by opening the equipment (Fig. 4) and completely
separating the white cover from the blue component. Re-
move the screw (Fig. 5), access the battery compartment
(Fig. 6), replace the battery respecting the polarity (Fig. 7),
screw back (Fig. 8) and fit the blue component inside the
white shell again (Fig. 9).
1.7 DISPOSING OF THE PRODUCT
Follow the instructions provided below for disposal (Para-
graphs 1.7.1 – 1.7.2.).
1.7.1 THIS PRODUCT COMPLIES WITH
THE DIRECTIVE 2012/19/EU.
The crossed bin symbol on the appliance indicates that
the product, at the end of its life, must be disposed of
Tabla de contenido
