IPC PW-H28 Manual De Instrucciones página 22

TRANSPORTING
To move the machine, di-
sconnect it from the mains
electricity and water supplies,
release the parking brake on
the side of the machine and
push it by the handle.
COMMAND AND CONTROL DEVICES
!
Warning
Before connecting the machine to the water supply and to the
power mains, it is essential to know the function of the cleaner's
command and control devices.
SAFETY DEVICES
The safety devices protect the user and the appliance. They
must not be tampered with or used for other than their desi-
gnated purpose.
protects the high pressure hydraulic circuit in
the event of a by-pass valve malfunction or if the hydraulic
circuit is blocked.
The safety valve is calibrated by the Manufacturer and sealed.
Operations involving the safe-
ty valve must be performed by
a technical service centre only.
Prevents the trig-
ger on the handgrip from being
operated accidentally.
stops the
high pressure washer if the
electric motor overheats.
WATER CIRCUIT CONNEC-
TION
Connect the feed hose to the
-
Check that the pressure and
quantity of the water supplied
the cleaner to work properly:
200 to 800 kPa (29 to 116 PSI).
Maximum temperature of
feeding water 50°C (122°F).
Connect the high pressure
English
!
!
Never suck up liquids containing solvents or acids in the pure
state, for example petrol, paint solvents or diesel. The spray mist
FIG. 4
Current regulations specify that the appliance may not be con-
nected to the drinking water supply unless a suitable system
Use a suitable EN 12729 type BA system separator.
Water passing through a system separator is no longer classi-
!
Do not connect the machine to a drinking water container.
ELECTRICAL CONNECTION
The water cleaner must be connected to a mains electricity
supply conforming to current legislation and standards.
Ensure that the mains voltage available is the same as the vol-
tage at which the cleaner is supposed to work; this is indicated
C C
B B
!
- The electric cable must be protected from accidental crushing.
- Do not use the machine if the supply cable is damaged.
A A
FIG. 5
- The use of any electric appliance requires the respect of
some basic rules:
clothing.
to disconnect the plug from the electric supply.
As for the protection against electric shock, the H.P.cleaner
belongs to CLASS I.
FIG. 6
- 22 -
Danger
Danger
Information
Respect the instructions provided by the water utility
company.
Warning
Danger
-