Power Supply; Electrical Connections - DIEL ME 100 Manual De Instalacion Y Uso

• Comparison of temperature for cooling fan between two different levels (L and
H).
• Four selectable operating modes.
• Detection of fault probes, maximum flexibility of managing and semplicity of
programming, checking of validity of the insert data during programming phase.
• Continuos storage of planned and reached values by each channel (limits and
historic highs).
• Dielectric isolation: 2.5 KV AC for 60".
• Software configuration to control the environment temperature.
• Resolution 1° C.
• Working temperature of device from -20°C to 60°C.
• Max allowed dampness in the room 90% not condensing.
• Electrical connections with fast polarised connectors.
• Possibility of manual relays switch through menu test relays to simulate and
check the reliability of contact.
• Technical manual in three languages (and more on request).
• Construction in accordance with rules
• Input filter for power supply in accordance with rules
• Tropicalization (optional).
Perform a square hole measuring 91x91 mm, fasten the ME100 V3 through the
special hooks.
The device can be supplied with (24÷240) Volt AC/DC ± 10% 50/60 Hz without
respect of polarity.
The power supply terminals are indicated with the abbreviation AL1-AL2 and are
also shown in table TAB 1 at the end of the manual.
Perform the connections on the terminal board following the scheme on TAB 1 at
ASSEMBLY

POWER SUPPLY

ELECTRICAL CONNECTIONS

- 12 -
ENGLISH
.
.