Wired Remote Control Unit (Optional Parts); Parts Name And Functions - Sanyo SPW-XDR74GXH56 Manual De Instrucciones

O: Remote control sensor
J: TIMER SET button
K: Time setting buttons
G: CHECK button
N: VENTILATION button
F: FILTER button
A: ON/OFF operation button
B: Operation lamp
C: MODE button
(AUTO)
(HEAT)
(DRY)
(COOL)
(FAN)
D: Temperature setting
buttons
E: FAN SPEED selector
button
(AUTO)
(HI.)
(MED.)
(LO.)
F: FILTER button
G: CHECK button
H: UNIT button
OI-751-15-EG

Wired Remote Control Unit (Optional parts)

Parts Name and Functions

• This remote control unit can be used to operate up to eight indoor units. Once the
operation settings are made, the units can be operated by simply pressing the ON/
OFF operation button.
• In the SPW-AS, U, D, F and FM series, the flap position is not shown on the display.
• The SPW-DR764/964GXH56 (A/B) does not have a dry function.
L: SET button
M: CL button
This button is for turning the air conditioner on and off.
This lamp lights when the air conditioner is turned on.
This lamp blinks when an error occurs or a protective device is activated.
Use this button to select one of the following five operating modes.
: Used to automatically set cooling or heating operation. Only for single heat pump type
: Used for normal heating operation. Only for heat pump type
: Used for dehumidifying without changing the room temperature.
: Used for normal cooling operation.
: Used to run the fan only, without heating or cooling operation.
: Press this button to increase the temperature setting.
: Press this button to decrease the temperature setting.
: The air conditioner automatically decides the fan speeds.
: High fan speed
: Medium fan speed
: Low fan speed
This button is used to turn off the filter sign (
clean the filter, and then press this button to turn off the sign.
This button is used only when servicing the air conditioner.
Do not use the CHECK button for normal operation.
When more than one indoor unit is connected, this button is used to select a unit when
adjusting the airflow direction.
If no unit is selected, the airflow direction of all units can be adjusted concurrently using the
FLAP button.
B: Operation lamp
A: ON/OFF operation button
E: FAN SPEED selector button
C: MODE button
D: Temperature setting
buttons
H: UNIT button
I: FLAP button
(temperature range: 17 to 27°C)
(temperature range: 16 to 30°C)
(temperature range: 18 to 30°C)
(temperature range: 18 to 30°C)
). When the filter sign appears on the display,
15