Operation - ANSMANN HS20RPRO Manual De Instrucciones

LED display (charge process)
Display
3 LEDs (continuously illuminated)
3 LEDs (flashing)
2 LEDs (flashing)
1 LED (flashing)
Note: If the product is switched on during the charging process, the
lighting power will be reduced to 15%.

OPERATION

Button
Mode button
LED selection button LED for close range
• The spotlight can be tilted up to 90° using the joint.
• The magnets on the bottom of the lamp enable the product to be
mounted on most magnetisable surfaces.
• The coloured filter can be fitted to the spotlight if required.
LED display (lighting mode)
Display
3 LEDs (continuous)
2 LEDs (continuous)
1 LEDs (continuous)
1 LED (flashing)
Note: Just before the rechargeable battery is empty, the spotlight
flickers 3x every 15 seconds. Approx. 2 minutes of lighting remains at
this point. Immediate charging is recommended.
Deutsch |
16
Svenska | Italiano | Nederlands | Dansk | Suomi | Norsk
Rechargeable battery status
Approx. 100 %
Approx. 67-99%
Approx. 34-66 %
Approx. 0-33 %
Function
Short button press: Switch on/off
Press and hold whilst switched off:
Soft-start dimming 8-100%
Double-click: Warning flashing mode
Press and hold whilst switched on:
Dimming
LED for medium range
LED for long range
All LEDs simultaneously
Rechargeable battery status
Approx. 100-67 %
Approx. 66-34 %
Approx. 33-11 %
Approx. 10-0 %
English | Français | Español | Português