Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The door is opened using the keys provided.
Keep the key code printed at the end of the "Technical Data" document in a safe
place, and never in the strongbox. In the case of lost or broken keys the code is
necessary to obtain another key, which will be sent by registered post. To request a
copy of your key, contact the technical service closest to your location. Search our
nearest Technical Service on our website: www.btv.es.
Attention: When opening the safe, take the utmost care not to drop the door. It
is completely separate from the box, there being no hinge or anchoring system to
allow better access to the interior of the safe.
• Adjustable Body (4). The Kabila safe has a telescopic system which allows it to
be adjusted to any depth between 201.5mm and 240mm. We recommend you
to install the safe at the maximum extension. It not only offers maximum internal
EN
space, but it also makes for a stronger anchorage and heightened security.
• Rear Body (5).
Safe installation
•For proper security of the safe we recommend installation by qualified personnel,
however DIY installation is simple if the correct procedures are followed.
• Use gloves when handling the safe until it is completely installed in the correct
position to avoid marks and scratches.
•Take care not to drop or dent the safe as this could cause distortion on it.
•Take care when removing the door, especially before installation, as there is no
hinge or anchoring system, to allow for better access to the interior. The door is
completely separate.
• To open the door turn the key to its end, being secured AND DOES NOT
PRODUCE RETURN. Always keep the key in this position to open and close the
door, this ensures that the door does not detach from the key and prevents its free
fall.
• Remove the waterproof and dust proof seal (lid (1) and sealing ring (3)) if you
are installing the box in a wall, they are not required. For installation in the floor
keep these parts attached.
• While making the hole for the installation keep the door and the safe away from
the work to prevent dust and dirt from damaging the lock.
• Site the safe in a position where it can be disguised or hidden. Do not install the
safe in damp areas or insecure constructions , as the security of the safe depends
on its installation in a solid foundation.
• The safe can be installed slightly below ground level to allow for camouflage by
a vent, tile, furniture or any other decorative object.
7
Tabla de contenido
