DeLonghi HOLMO DRY ELETTRICO Manual De Instrucciones Para El Uso página 57

PROGRam P2
FROM MONDAY TO SUNDAY
PROGRam P3
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
PROGRam P4 - cuSTOm
With the "P4" program, you can set different temperatures
("Comfort" and "Night/Eco") over a 24 hour period for each
day of the week.
SETTING ThE cuRRENT Day aND TImE
Before setting the custom programme, make
sure the time and day of the week are set cor-
rectly. If this is not the case, press the "Mode"
button until the icon
Then press the "Mode" button again and hold
it down until the number indicating the day
flashes.
Adjust the day of the week by using the "+"
and "-" keys (1=MON, 2=TUE,...7=SUN), then
confirm by pressing the "Mode" selection key.
The hour starts flashing. In the same way, adjust
the hour by using the "+" and "-" keys and confirm
with "Mode" selection key.
Repeat the same procedure for the minutes.
SETTING ThE PROGRam
Now an hourly sequence can be set for each day. Start with
the first day. Choose by means of the "+" and "-" buttons, for
each hour, between the "Comfort" temperature (full bar) and
the "Night/Eco" temperature (empty bar).
HOURS MODE
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
HOURS MODE
0 - 6 Night/Eco
6 - 9 Comfort
9 - 13 Night/Eco
13 - 23 Comfort
23 - 0 Night/Eco
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco
is displayed.
T Night/Eco T Comfort
0h 2 4 6 8 10 12 14 16 18 20 22 24
Press the "Mode" key to confirm and repeat
the same procedure for each day of the week.
The weekly program is now set, the appliance
emits an acoustic signal for confirmation.
FuNcTIONS
The appliance has a number of special functions to custo-
mise and optimise use.
OPEN WINDOW
The "Open Window" function cannot be activated or deacti-
vated on the remote control (see Ch. 4.3.1).
OvERDRIvE (2h)
The "Overdrive (2h)" can be used to heat the room quickly.
Press the "2h" button to start the "Overdrive
(2h)".
The function cannot be activated when the
appliance is in "Standby".
The temperature set point disappears from the display of
the remote control.
The appliance heats at the maximum power for 2 hours, in-
dependently from the temperature setting.
To deactivate the "Overdrive (2h)" function at any time, press
the "2h" button again, the "Mode" button or the "Standby"
button.
The "Overdrive (2h)" is set to stop automatically after 2
hours anyways.
53
T Night/Eco T Comfort
EN