Specification - Aim TTi TG5011A Manual De Instrucciones

General specifications apply for the temperature range 5°C to 40°C. Accuracy specifications apply
for the temperature range 18°C to 28°C after 30 minutes warm−up, at maximum output into 50Ω.
Typical specifications are determined by design and are not guaranteed.
TG2512A limits, where different, are shown in square brackets [ ] after the TG5012A limits.
Waveforms
Standard Waveforms
Sine, Square, Ramp (Variable Symmetry), Triangle, Positive Ramp, Negative Ramp, Pulse,
Noise (Gaussian), PRBS, DC, Sin(x)/x, Exponential Rise, Exponential Fall, Logarithmic Rise,
Logarithmic Fall and 4 User Defined Arbitrary Waveforms. Haversine, Gaussian, Lorentz and
Cardiac are supplied on CD.
Sine
Frequency Range:
Frequency Resolution:
Output Level:
Amplitude Flatness
(At ≥3.17Vpp (into 50Ω),
Relative to 1kHz):
Harmonic Distortion:
Non−Harmonic Spurii:
Phase Noise (10kHz offset):
Square
Frequency Range:
Frequency Resolution:
Output Level:
Rise and Fall Times:
Overshoot:
Variable Duty Cycle:
Asymmetry (@ 50% duty):
Jitter (RMS):
2
1µHz to 50MHz [1µHz to 25MHz]
1µHz, 14 digits
10mVp-p to 10Vp−p into 50Ω
<100kHz 0.1dB
<5MHz 0.15dB
<25MHz 0.3dB
<50MHz 0.5dB
DC to 20kHz
20kHz to 100kHz
100kHz to 1MHz
1MHz to 25MHz
25MHz to 50MHz
<–60dBc to 1MHz, <–60dBc + 6dB/octave 1MHz to 50MHz
-115dBc/Hz, typical
1µHz to 50MHz [1µHz to 25MHz]
1µHz, 14 digits
10mVp-p to 10Vp−p into 50Ω
<8ns [<13ns]
<5%
20% to 80% to 20MHz, 0.1% resolution
40% to 60% to 25 MHz, 0.1% resolution
50% (fixed) above 25MHz
1% of period + 5ns
0.5ns + 100 ppm of period, typical

Specification

<1 Vp-p ≥ 1Vp-p
-65dBc -65dBc
-60dBc -60dBc
-45dBc -45dBc
-40dBc -35dBc
-40dBc -28dBc