Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Symbol
When the arrow appears:
• Pressing the Red Button allows the
access to the submenu (example
4000->4100).
When the arrow « return »" appears:
• Pressing the Red Button allows the
access to the higher menu (example
4150->4100).
8.3.5 Menu description
List (Fig. A7)
<1.0.0.0>
Position
Switch 1
OPERATION
OFF
SERVICE
ON
• To adjust the setting point, turn the Red Button.
The display changes to menu <1.0.0.0> and the
setpoint begins to blink. The new rotation (or a
new action on arrows) allows increasing or de-
creasing of the value.
• To confirm the change, press the Red Button, the
display returns to the status page.
<2.0.0.0>
Position
Switch 1
OPERATION
OFF
SERVICE
ON
• The available operating modes are « Speed con-
trol », « Constant pressure », « Variable pressure
» and P.I.D control.
<3.0.0.0>
Position
Switch 1
OPERATION
OFF
SERVICE
ON
<4.0.0.0>
Position
Switch 1
OPERATION
OFF
SERVICE
ON
• The « Information » menu displays measuring,
device and operating data, see, (Fig. A8).
20
Description
Description
Adjustment of the setting
point, possible for both
cases.
Description
Only on reading for ope-
rating modes.
Setting for operating
modes.
Description
Setting ON / OFF of the
pump.
Description
Only reading for the
« Information » menu.
<5.0.0.0>
Position
Switch 1
Only reading for the
OPERATION
OFF
« Service » menu.
Setting for « Service »
SERVICE
ON
menu.
• The « Service » menu allows access to changing
converter parameter settings.
<6.0.0.0>
Position
Switch 1
OPERATION
OFF
Display of the error page.
SERVICE
ON
• If one or several errors arise, the error log is dis-
played.
The letter « E » followed by three digit code ap-
pears (chapter 10).
<7.0.0.0>
Position
Switch 1
OPERATION
OFF
Display of « Access lock »
symbol.
SERVICE
ON
• The « Access lock » is available when the switch 2
is in the ON position.
CAUTION! Material damage!
Improper setting changes can lead to pump oper-
ation defects, which can lead to material damage
on the pump or installation.
• Settings in « SERVICE » mode should only be
made during commissioning and only by skilled
technicians.
Description
Description
Description
WILO SE 05/2014
Tabla de contenido
