Safety Recommendations - Sincro FB2 MB Manual Del Usuario

1. SAFETY RECOMMENDATIONS

We thank you for having chosen a Sincro product, and
we are sure that it will satisfy all your expectations in high
standards and performance.
The "User and Maintenance Manual" included with the
generator provides important indications regarding safety,
installation, use and maintenance. This product complies
with recognised standards in good engineering and
provisions related to safety.
When contacting Sincro, always report the generator
type and code, found on the label attached to the packing.
What's more, in the event of malfunction or any other kind
of machine fault that should require our Aftersales Service,
please specify the serial number (SN).
ALTERNATOR
ALTERNATOR
TYPE
CODE
An incorrect installation or improper use of
the product may cause damage to persons
and objects.
CAUTION!
• Strictly observe the instructions given in the "User and
Maintenance Manual" that is provided to indicate the
correct conditions for installation, use and maintenance,
in order to prevent malfunctions in the generator and avoid
hazardous situations for the user.
• Dispose of all packing material (i.e. plastic, cardboard,
polystyrene, etc.) according to statutory regulations.
• Keep the instructions with the technical folder and for
future consultation.
• This product has been designed and constructed solely
for the applications indicated in this manual. Any use not
specified in this manual may cause damage to the product and become a source of hazard.
• Sincro declines all liability arising from any use whether
improper or differing from its original concept and specified
ALTERNATOR
SERIAL No
in this manual.
• Do not install the product in a potentially explosive
atmosphere.
• The plant component elements must comply with European
Directives. To ensure good safety levels, these standards
should also be observed in non EU countries, in addition
to the country specific statutory regulations.
• The installation must comply to the law in force in the
country where it is done and must be carried out solely by
qualified specialists.
• Do not start up the generator if the protective covers,
the access panels or the terminal box cover have been
removed.
• Before performing any maintenance:
- disable the starting circuit of the engine,
- disable the closing circuits and / or place warning
labels on each circuit breaker used for connecting to the mains or to other generators, in order to prevent
accidental closure.
• Only use genuine parts for any maintenance or repair.
Failure to observe this recommendation shall free Sincro
from all responsibility related to the generator safety and
good operation.
• Train the plant operator in the management, use and
maintenance of the generator.
• Anything not expressly prescribed in these instructions is
prohibited.
ENGLISH
17