Declaration Of Conformity - profiline BTI-WKS 115 V Instrucciones De Servicio

Declaration of Conformity

We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents: EN 60745 according to
the provisions of
98/37/EC.
Jürgen Dietz
General Manager
BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen
Assembly
Mounting the Protective Devices
Before any work on the machine itself, pull
the mains plug.
Protection Guard for Sanding
tection guard 12 to the requirements of the work proc-
ess. For this, press the release lever 1 upward and turn
the protection guard 12 to the required position.
Adjust the protection guard 12 in such a man-
ner that sparking is prevented in the direction
of the operator.
The protection guard 12 may be turned only
upon actuation of the release lever 1! Other-
wise the power tool may not continue to be
used under any circumstances and must be
taken to an after-sales service agent.
Note: The encoding keys on the protection guard 12
ensure that only a protection guard that fits the machine
type can be mounted.
44 | English
the directives 89/336/EEC,
i. V. Günter Hub
Purchasing Manager
Place the protection guard 12
onto the spindle collar as
shown in the illustration. The tri-
angle marks on the protection
guard must correspond with
the respective marks on the
gear case.
Press the protection guard 12
onto the spindle collar until the
shoulder of the protection
guard is seated against the
flange of the machine, and turn
the protection guard until it can
clearly be heard to engage.
Adjust the position of the pro-
Protection Guard for Cutting
For cutting metal, always work with the pro-
tection guard for cutting 13.
For cutting stone, always work with the cut-
ting guide with dust extraction protection
guard 20.
The protection guard for cutting 13 is mounted in the
same manner as the protection guard for sanding 12.
Extraction Hood for Sanding
The extraction hood 7 can be used for low-dust sand-
ing of paint, varnish and plastics in conjunction with the
carbide grinding head 9 or the rubber sanding plate 16
with a sanding sheet 17. The extraction hood 7 is not
suitable for working metals.
A suitable BTI vacuum cleaner can be connected to the
extraction hood 7.
The extraction hood 7 is mounted in the same manner
as the protection guard 12. The brush collar is
exchangeable.
Auxiliary Handle
Operate your machine only with the auxiliary
handle 5.
Screw the auxiliary handle 5 on the right or left of the
machine head depending on the working method.
Vibration-dampening Auxiliary Handle
The vibration-dampening auxiliary handle reduces the
vibrations, making operation more comfortable and
secure.
Do not make any alterations to the auxiliary
handle.
Do not continue to use an auxiliary handle if it is
damaged.
Hand Guard
For operations with the rubber sanding plate
16 or with the cup brush/wheel brush/flap
disc, always mount the hand guard 15.
The hand guard 15 is fastened with the auxiliary handle 5.
Mounting the Grinding Tools
Before any work on the machine itself, pull
the mains plug.
Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
Clean the grinder spindle 6 and all parts to be mounted.
For clamping and loosening the grinding tools, lock the
grinder spindle with the spindle lock button 2.
Actuate the spindle lock button only when the
grinder spindle is at a standstill. Otherwise, the
machine may become damaged.
1 609 929 L12 • 19.3.07