Technical Data; Noise/Vibration Information - profiline BTI-WKS 115 V Instrucciones De Servicio

3 Thumbwheel for speed preselection
(BTI-WKS 125 VRE)
4 On/Off switch
5 Auxiliary handle
6 Grinder spindle
7 Extraction hood for sanding*
8 Mounting flange with O-ring
9 Carbide grinding head*
10 Clamping nut
11 Quick-clamping nut
12 Protection guard for sanding

Technical Data

Angle Grinder
Art. No.
Rated power input
Output power
No-load speed
Grinding disc diameter, max.
Thread of grinder spindle
Kickback stop
Restarting protection
Reduced starting current
Constant electronic control
Speed preselection
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these val-
ues can vary.

Noise/Vibration Information

Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Vibration total values (triax vector sum) determined according to
EN 60745:
Surface grinding:
Vibration emission value a
Uncertainty K=
Disk sanding:
Vibration emission value a
Uncertainty K=
The vibration emission level given in this information sheet has been measured in accordance
WARNING
with a standardised test given in EN 60745 and may be used to compare one tool with another.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase
above the level given in this information sheet. This could lead to a significant underestimate of exposure when
the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of exposure to vibration experienced during a given period of
work should also take into account the times when the tool is switched off and when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period.
1 609 929 L12 • 19.3.07
*
h
h
13 Protection guard for cutting*
14 Grinding/cutting disc*
15 Hand guard*
16 Rubber sanding plate*
17 Sanding sheet*
18 Round nut*
19 Cup brush*
20 Cutting guide with dust extraction protection
guard *
21 Diamond cutting disc*
*The accessories illustrated or described are not
included as standard delivery.
BTI-WKS 115 V
009303
W
W
rpm 11000
mm
kg
BTI-WKS 125 VRE
800
500
2800 – 11000
115
M 14
–
–
–
–
–
1.9
/II
009303
dB(A) 91
dB(A) 102
dB 3
2
m/s 5.5
2
m/s 1.5
2
m/s 3.0
2
m/s 1.5
English | 43
009313
1400
820
125
M 14
2.2
/II
009313
91
102
3
8.5
1.5
3.0
1.5