Getting Started; Overview Of Modes - AKASO V50 Pro SE Manual De Instrucciones

GETTING STARTED

Welcome to your AKASO V50 Pro SE. To capture video and photos, you need a
microSD card (sold separately).
MICRO SD CARDS
Use brand name memory cards that meet these requirements:
• microSD, microSDHC, or microSDXC
• Class 10 or UHS-III rating
• Capacity up to 64GB (FAT32)
Note:
1. Please format the microSD card first in this camera before using. To keep your
microSD card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
2. FAT32 format microSD card stops recording when the storage of each file is over
4GB and starts to record again on a new file.
POWERING ON + OFF
To Power On:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is on. When information appears on the display or the camera
status screen, your camera is on.
To Power Off:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is off.
SWITCHING MODE
To Switch Mode:
Turn on the camera, tap Mode Shift icon or press Mode button to switch mode.
To Exit Mode:
Press Mode button to exit mode.
4
TURNING ON/OFF Wi-Fi
To turn on Wi-Fi
Turn on camera, swipe down from the top of the screen with your finger or tap
shortcut key to access to menu. Then tap Wi-Fi icon to turn on Wi-Fi. You can also
enter General Setting to turn on Wi-Fi.
To turn off Wi-Fi
Press and hold Shutter button for 5 seconds to turn off Wi-Fi.

OVERVIEW OF MODES

There are 4 modes: Video, Photo, Playback and Setting.
VIDEO MODE
Video Mode is the default mode when you turn on the camera.
In Video Mode, press Shutter button, the camera starts recording video.
Press Shutter button to stop recording video.
Video Mode
M
Video Resolution
4K/30fps
M
Menu
Beep
Battery Capacity
Mode Shift
Image Stabilization
Shotcut Key
Mic Speaker RF Wi-Fi
5