Getting Started; Memory Cards; Switching Mode - AKASO EK7000 Pro Manual Del Usuario

Ocultar thumbs Ver también para EK7000 Pro:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
EN

GETTING STARTED

Welcome to your new EK7000 Pro. To capture video and photos, you need a memory
card (sold separately). The camera supports external microphone.

Memory CARDS

Use brand name memory cards that meet these requirements:
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note:
1. When EK7000 Pro powers on for the first time or restores factory Settings to
power on, the Language selection page will pop up. Please select and set the
camera system Language. You can also change the system Language in the
Settings.
2. Please format the memory card first in this camera before using. To keep your
memory card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
3. FAT32 format memory card stops recording when the storage of each file is over
4GB and starts to record again on a new file.
POWERING ON + OFF
To Power On:
Press and hold Mode button for three seconds. The camera beeps while the camera
status light is on. When information appears on the display or the camera status
screen, your camera is on.
To Power Off:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is off.

SWITCHING MODE:

To Switch Mode:
Press the Mode button after you turn on the camera, you can switch the mode.
To Exit Mode:
Press the Mode button to exit mode.
5
Tabla de contenido
loading

Tabla de contenido