Getting Started - AKASO Brave 4 Manual Del Usuario

EN

GETTING STARTED

Welcome to your AKASO Brave 4. To capture videos and photos, you need a microSD
card (not included).
microSD CARDS
Use brand name memory cards that meet these requirements:
• microSD, microSDHC, or microSDXC
• Class 10 or UHS-III rating
• Capacity up to 64GB (FAT32)
Note:
1. Before using, please format the microSD card in the camera. To keep your microSD
card in good condition, reformat it on a regular basis. Reformatting deletes all of
your data, so be sure to transfer your photos and videos first.
2. The FAT32 format microSD card will stop recording when the storage of each file
exceeds 4GB and start to record again on a new file.
POWERING ON/OFF
To Power On:
Press and hold the Mode button for three seconds. The camera will beep and the
status light will be on. When information appears on the display or the camera status
screen, your camera is on.
To Power Off:
Press and hold the Mode button for three seconds. The camera will beep and the
status light will be off.
SWITCHING MODE
To Switch Mode:
Turn on camera, press the Mode button to switch mode, or tap "Video" on the screen
and click to select modes.
To Exit Mode:
Press the Mode button to exit mode.
5