AKASO V50 Pro SE Manual De Instrucciones página 8

3. Time Lapse Duration: Unlimited/5 Min/10 Min/15 Min/20 Min/30 Min/60 Min
Default setting is Unlimited.
Note: If you want to set Time Lapse Duration, please turn on Time Lapse Interval
first.
4. Burst Photo: OFF, 3 shots/1s, 7 shots/2s, 15 shots/4s, 30 shots/8s
Default setting is off.
Burst captures up to 30 photos in 8 seconds, so it is perfect for capturing fast-
moving activities.
5. Delay Timer: OFF/3 Sec/5 Sec/10 Sec
Default setting is off.
A Delay timer gives a delay between pressing the shutter release and the shutter's
firing. It is most commonly used to let photographers to take a photo of themselves
(often with family).
6. Date Stamp: OFF/Date/Date&Time
Default setting is Date&Time.
If you select Date&Time, this camera adds date stamp to the photos you take.
7. Scene Mode: Manual/Outdoor/Indoor/Portrait/Landscape/Night
Default setting is Manual.
8. Picture Quality: S-Fine/Fine/Normal
Default setting is S-Fine.
EFFECT SETTING
1. AE Meter: Center/Average/Spot
Default setting is Center.
In photography, the metering mode refers to the way in which a camera determines
exposure. Cameras generally allow the user to select between center, average or
spot metering modes. The different metering modes allow the user to select the
most appropriate one for use in a variety of lighting conditions.
10
2. FILTER: None/Black & White/Sepia/Vivid/Natural/Negative/Warm/Coo l/Red/ Green
/Blue
Default setting is None.
3. White Balance: Auto/Daylight/Shade/Tungsten Light/White Fluorescent
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to
optimize for cool or warm lighting conditions. When you change this setting, the
display immediately shows you the effect on your image.
4. EV: -2.0/-1.0/+0.0/+1.0/+2.0 (Exposure Value)
Default setting is +0.0.
By default, your camera uses the entire image to determine the appropriate
exposure level. However, Exposure lets you select an area that you want the camera
to prioritize when determining exposure. This setting is particularly useful in shots
where an important region might otherwise be over- or underexposed.
When you change this setting, the display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to
determine the correct level of exposure.
5. ISO: Auto/50/100/200/400/800/1600
Default setting is Auto.
ISO determines the camera's sensitivity to light, and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image.
In low light, higher ISO values result in brighter images, but with greater image noise.
Lower values result in lower image noise, but darker images. When you change this
setting, the display immediately shows you the effect on your image.
11