Beginning Work With The Machine - diversey TASKI swingo 4000 Manual De Instrucciones

Notice:
TASKI offers an automatic dosage feature as an op-
tion. It is possible to mount it additionally.
- Please contact your customer service.
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en-
vironment.
Pre-cleaning
Warning:
When cleaning with the protective roof installed,
please note that the clearance height is 2.1 m.

Beginning work with the machine

Caution:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Caution:
Whilst operating the machine always keep both
hands on the steering wheel / driving handle, so
that safe operation is guaranteed.
Caution:
Start familiarization with the machine by making
your first driving attempts in a free area.
Warning:
Before beginning work (in the work position), check
whether your field of vision is sufficient to ensure
safe working. EN 3411 must be adhered to.
An insufficient field of vision can make work difficult and
therefore impair safety for the operator, machine and
third parties.
Warning:
While working, note the maximum clearance height
for doors and underpasses, which are shown on the
warning sign on the machine.
Danger:
If there is a danger of falling objects during use of
the machine, the necessary safety precautions
must be taken or adhered to in accordance with na-
tional regulations.
Notice:
When working in public buildings, the warning light
must be switched on.
• Sit down on the driver seat.
• Check whether the emergency stop button is released.
• Switch on the machine (key switch).
The indicator elements will light up briefly.
Manual program start
• Press the Suction unit ON/OFF but-
ton.
The display lights up, the suction mo-
tor starts and the squeegee is auto-
matically lowered to the operating
position.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start-
ed when the brushes rotate.
• Select the desired dosing by press-
ing the +/- buttons from level 1-6.
Notice:
Diversey recommends a sustainable working by de-
termination of the correct product dosing quantity.
Overdosing or underdosing will lead to unsatisfactory
cleaning results.
Notice:
TASKI offers an automatic dosage feature as an op-
tion. It is possible to mount it additionally.
- Please contact your customer service.
• Press the Brush drive ON/OFF but-
ton.
The display lights up, the brush unit
is lowered and the engaging process
starts automatically.
• Select the desired brush pressure
rating by pressing the +/- buttons
from level 1-3.
Notice:
Always calculate and select the lowest level that is
sufficient for good cleaning results.
Thus you will optimize power consumption and increase
the service life of the machine.
ECO mode
• The ECO mode is activated by press-
ing the ECO mode ON/OFF button.
By doing so, the speed of the suction
motor is reduced and the dosage of
the cleaning solution is set to level 2
and the brush pressure is set to level
1.
Notice:
If required, the level of the cleaning solution can be
adjusted manually in ECO mode.
The ECO mode is suitable for smoother floors without
joints.
69